Show simple item record

FieldValueLanguage
dc.contributor.authorZhu, Liwen
dc.contributor.authorNguyen, Duc
dc.contributor.authorDavey, Tim
dc.contributor.authorBaker, Matthew
dc.contributor.authorSuch, Chris
dc.contributor.authorHawkett, Brian
dc.contributor.authorNeto, Chiara
dc.date.accessioned2019-02-07
dc.date.available2019-02-07
dc.date.issued2017-10-15
dc.identifier.citationLiwen Zhu, Duc Nguyen, Tim Davey, Matthew Baker, Chris Such, Brian S. Hawkett, Chiara Neto, Mechanical properties of Ropaque hollow nanoparticles,Polymer,Volume 131,2017,Pages 10-16,ISSN 0032-3861, https://doi.org/10.1016/j.polymer.2017.10.030. (http://www.sciencedirect.com/science/article/pii/S0032386117309941)en_AU
dc.identifier.urihttp://hdl.handle.net/2123/19960
dc.description.abstractThe elastic properties and strength upon compression of commercial Ropaque polystyrene hollow particles were investigated by atomic force microscopy (AFM). These particles are commonly used in paints as opacifying agents, as their internal air void effectively scatters light. A sharp AFM tip was used to apply a point load to the particle surface, and increased to probe both the elastic and plastic deformation of the shell, and then further until the shell broke. For small deformations, the deformation increased linearly with applied force. The Young’s modulus was calculated by accounting for the effect of the rigid substrate, and compare the modulus obtained from the Reissner and Hertz models. The minimum stress needed to destroy the integrity of the shell was extracted and found to be smaller than or close to that of silica hollow particles with different shell thickness tested in the literature.en_AU
dc.description.sponsorshipAustralian Research Council and DuluxGroup Australia through Linkage granten_AU
dc.language.isoen_AUen_AU
dc.publisherElsevieren_AU
dc.relationARC Linkage Project LP140100285en_AU
dc.rights© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0en_AU
dc.subjectAtomic force microscopyen_AU
dc.subjectMechanical propertiesen_AU
dc.subjectHollow polymer particlesen_AU
dc.titleMechanical properties of Ropaque hollow nanoparticlesen_AU
dc.typeArticleen_AU
dc.subject.asrcFoR::091209 - Polymers and Plasticsen_AU
dc.subject.asrcFoR::091308 - Solid Mechanicsen_AU
dc.subject.asrcFoR::100799 - Nanotechnology not elsewhere classifieden_AU
dc.subject.asrcFoR::030304 - Physical Chemistry of Materialsen_AU
dc.subject.asrcFoR::030603 - Colloid and Surface Chemistryen_AU
dc.identifier.doi10.1016/j.polymer.2017.10.030
dc.type.pubtypePost-printen_AU
dc.description.embargo2019-10-15


Show simple item record

Associated file/s

Associated collections

Show simple item record

There are no previous versions of the item available.