Effect of Inflow Conditioning for Dry Powder Inhalers
Access status:
Open Access
Type
ArticleAbstract
The transport of pharmaceutical dry powder inside an optically accessible inhaler-like device is studied using both macro- and microscopic high-speed imaging. The investigation aims to systematically study the effect of inflow modifications on the dispersion characteristics of ...
See moreThe transport of pharmaceutical dry powder inside an optically accessible inhaler-like device is studied using both macro- and microscopic high-speed imaging. The investigation aims to systematically study the effect of inflow modifications on the dispersion characteristics of agglomerates inside a dry powder inhaler (DPI) geometry. An inhaler device was designed with geometrical features akin to commercial inhalers used in the current market and research oriented inhalers such as the Twincer®: two offset inlet channels (one with a powder pocket), a clockwise swirling chamber and a single outlet channel. At the device outlet, a vacuum pump was fitted with an actuator and calibrated to achieve a steady state inhalation with a peak flowrate of 85 and 125 L/min. Airflow conditions at the intake of the device were strategically perturbed in order to induce powder fluidisation and dispersion using turbulence grids and through physically obstructing channel streams in order to achieve changes in flow behaviour (e.g., flow separation). Complete fluidisation of the powder bed was observed with image processing enabling statistics on de-agglomerated fragment size and velocity. A range of behaviour was noted including local turbulence through introduction of a grid, bimodal fragment size behaviour for cohesive mannitol powder, as well as introduction of low velocity zones in the device through flow splitting. The geometry enables simple systematic study of inflow conditions into a DPI-like device with the data being useful for study of a given powder formulation (mannitol) and validation of computational models.
See less
See moreThe transport of pharmaceutical dry powder inside an optically accessible inhaler-like device is studied using both macro- and microscopic high-speed imaging. The investigation aims to systematically study the effect of inflow modifications on the dispersion characteristics of agglomerates inside a dry powder inhaler (DPI) geometry. An inhaler device was designed with geometrical features akin to commercial inhalers used in the current market and research oriented inhalers such as the Twincer®: two offset inlet channels (one with a powder pocket), a clockwise swirling chamber and a single outlet channel. At the device outlet, a vacuum pump was fitted with an actuator and calibrated to achieve a steady state inhalation with a peak flowrate of 85 and 125 L/min. Airflow conditions at the intake of the device were strategically perturbed in order to induce powder fluidisation and dispersion using turbulence grids and through physically obstructing channel streams in order to achieve changes in flow behaviour (e.g., flow separation). Complete fluidisation of the powder bed was observed with image processing enabling statistics on de-agglomerated fragment size and velocity. A range of behaviour was noted including local turbulence through introduction of a grid, bimodal fragment size behaviour for cohesive mannitol powder, as well as introduction of low velocity zones in the device through flow splitting. The geometry enables simple systematic study of inflow conditions into a DPI-like device with the data being useful for study of a given powder formulation (mannitol) and validation of computational models.
See less
Date
2021Source title
International Journal of PharmaceuticsVolume
608Publisher
ElsevierLicence
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0Faculty/School
Faculty of Engineering, School of Aerospace Mechanical and Mechatronic EngineeringShare