Show simple item record

FieldValueLanguage
dc.contributor.authorOborn, B
dc.contributor.authorDowdell, S
dc.contributor.authorMetcalfe, P
dc.contributor.authorCrozier, S
dc.contributor.authorMohan, R
dc.contributor.authorKeall, P
dc.date.accessioned2018-03-23
dc.date.available2018-03-23
dc.date.issued2015-05-01
dc.identifier.citationMed Phys. 2015 May;42(5):2113-24.en
dc.identifier.urihttp://hdl.handle.net/2123/18025
dc.description.abstractPURPOSE: This paper investigates, via magnetic modeling and Monte Carlo simulation, the ability to deliver proton beams to the treatment zone inside a split-bore MRI-guided proton therapy system. METHODS: Field maps from a split-bore 1 T MRI-Linac system are used as input to geant4 Monte Carlo simulations which model the trajectory of proton beams during their paths to the isocenter of the treatment area. Both inline (along the MRI bore) and perpendicular (through the split-bore gap) orientations are simulated. Monoenergetic parallel and diverging beams of energy 90, 195, and 300 MeV starting from 1.5 and 5 m above isocenter are modeled. A phase space file detailing a 2D calibration pattern is used to set the particle starting positions, and their spatial location as they cross isocenter is recorded. No beam scattering, collimation, or modulation of the proton beams is modeled. RESULTS: In the inline orientation, the radial symmetry of the solenoidal style fringe field acts to rotate the protons around the beam's central axis. For protons starting at 1.5 m from isocenter, this rotation is 19° (90 MeV) and 9.8° (300 MeV). A minor focusing toward the beam's central axis is also seen, but only significant, i.e., 2 mm shift at 150 mm off-axis, for 90 MeV protons. For the perpendicular orientation, the main MRI field and near fringe field act as the strongest to deflect the protons in a consistent direction. When starting from 1.5 m above isocenter shifts of 135 mm (90 MeV) and 65 mm (300 MeV) were observed. Further to this, off-axis protons are slightly deflected toward or away from the central axis in the direction perpendicular to the main deflection direction. This leads to a distortion of the phase space pattern, not just a shift. This distortion increases from zero at the central axis to 10 mm (90 MeV) and 5 mm (300 MeV) for a proton 150 mm off-axis. In both orientations, there is a small but subtle difference in the deflection and distortion pattern between protons fired parallel to the beam axis and those fired from a point source. This is indicative of the 3D spatially variant nature of the MRI fringe field. CONCLUSIONS: For the first time, accurate magnetic and Monte Carlo modeling have been used to assess the transport of generic proton beams toward a 1 T split-bore MRI. Significant rotation is observed in the inline orientation, while more complex deflection and distortion are seen in the perpendicular orientation. The results of this study suggest that due to the complexity and energy-dependent nature of the magnetic deflection and distortion, the pencil beam scanning method will be the only choice for delivering a therapeutic proton beam inside a potential MRI-guided proton therapy system in either the inline or perpendicular orientation. Further to this, significant correction strategies will be required to account for the MRI fringe fields.en
dc.language.isoen_USen
dc.publisherAmerican Institute of Physicsen
dc.relationNHMRC 1036078, NHMRC 633000en
dc.rightsOther
dc.subjectMRI-proton therapyen
dc.subjectproton beamen
dc.subjectmagnetic fielden
dc.subjectMonte Carlo simulationen
dc.subjectmagnetic deflectionen
dc.titleProton beam deflection in MRI fields: Implications for MRI-guided proton therapyen
dc.typeArticleen
dc.subject.asrc029903en
dc.identifier.doi10.1118/1.4916661
dc.type.pubtypePreprinten
usyd.facultyFaculty of Medicine and Health, Sydney Medical Schoolen


Show simple item record

Associated file/s

Associated collections

Show simple item record

There are no previous versions of the item available.