Advanced analysis and reliability-based design of steel scaffolding systems
Access status:
Open Access
Type
ThesisThesis type
Doctor of PhilosophyAuthor/s
Reynolds, James BernardAbstract
This thesis presents a comprehensive investigation of the advanced analysis, reliability-based design and optimisation of steel support scaffolding systems. Support scaffolding systems are used to provide temporary support to timber formwork systems, reinforcement, concrete, workmen ...
See moreThis thesis presents a comprehensive investigation of the advanced analysis, reliability-based design and optimisation of steel support scaffolding systems. Support scaffolding systems are used to provide temporary support to timber formwork systems, reinforcement, concrete, workmen and equipment, during the construction of permanent structures such as buildings and bridges. Stick-type steel scaffolds with cuplok joints are the focus of the thesis. This thesis includes the collection and statistical analysis of shore load effects occurring as a result of construction dead and live loads. A comprehensive series of U-head joint subassembly tests, allowed the top rotational stiffness to be rationally quantified for advanced finite element modelling. Advanced finite element models are calibrated using data compiled in a previous investigation involving eighteen full-scale tests. This calibration exercise also provides statistical data for modelling error. Monte Carlo simulations using advanced analysis are performed to determine the statistical distributions of system strength for a range of geometric configurations of support scaffold systems. The research showed that system strength was governed mainly by jack extension at the top and bottom of the scaffolding system. By incorporating the load statistics and system strength statistics, the thesis determined the reliability of various steel scaffolding systems designed by the fundamental Load-Resistance-Factor-Design (LRFD) equation. The study further proposed a more efficient LRFD equation for steel scaffolding, based on an acceptable target reliability index.
See less
See moreThis thesis presents a comprehensive investigation of the advanced analysis, reliability-based design and optimisation of steel support scaffolding systems. Support scaffolding systems are used to provide temporary support to timber formwork systems, reinforcement, concrete, workmen and equipment, during the construction of permanent structures such as buildings and bridges. Stick-type steel scaffolds with cuplok joints are the focus of the thesis. This thesis includes the collection and statistical analysis of shore load effects occurring as a result of construction dead and live loads. A comprehensive series of U-head joint subassembly tests, allowed the top rotational stiffness to be rationally quantified for advanced finite element modelling. Advanced finite element models are calibrated using data compiled in a previous investigation involving eighteen full-scale tests. This calibration exercise also provides statistical data for modelling error. Monte Carlo simulations using advanced analysis are performed to determine the statistical distributions of system strength for a range of geometric configurations of support scaffold systems. The research showed that system strength was governed mainly by jack extension at the top and bottom of the scaffolding system. By incorporating the load statistics and system strength statistics, the thesis determined the reliability of various steel scaffolding systems designed by the fundamental Load-Resistance-Factor-Design (LRFD) equation. The study further proposed a more efficient LRFD equation for steel scaffolding, based on an acceptable target reliability index.
See less
Date
2014-02-24Faculty/School
Faculty of Engineering and Information Technologies, School of Civil EngineeringAwarding institution
The University of SydneyShare